6 Easy Steps of Pool Maintenance

An ideal summer typically involves spending time in a sparkling swimming pool. The luxury of a private pool does come with some responsibility but keeping your pool crystal clear doesn’t have to be as burdensome as you might think.

While all pools are different, basic pool maintenance is the same. The most important way to maintain a pool’s health is through routine care. Without proper maintenance, your pool could fall victim to a variety of unfortunate conditions. Green water and cracked pipes are not exactly appealing features in a swimming pool, after all.

Below are 6 steps you can follow to ensure your new pool remains in great condition for many summers to come:

1. Book Yearly Service Appointments Now

Before you start lounging poolside, book your yearly service appointment to find any problems before you start using your pool. Leave it up to the professionals to find and fix any issues with cracks, plumbing, filters, heating systems, and any other complex features in your pool.

2. Maintain a Constant Water Level

The physical water level of a pool is very important. It’s best to maintain a level that is halfway up the opening of the pool’s skimmer.If the water is not at the ideal level, there are easy ways to fix it. If the water is too low, simply add the water with your garden hose.

If the water level is too high, you use as a submergible pump to drain the excess water. When the pool has reached the appropriate water level, remember to re-check the chemicals, as the change in water level may have thrown them off balance.

A good time to check your pool’s water level is when you manually skim the water with a net to remove debris. Make sure the level does not fall below the level of the pool’s skimmer. If the water level is lower than the skimmer, it could also indicate that the pump is damaged.

3. Get Rid of Debris

Removing falling debris, like leaves and large pollen clumps, is one of the easiest ways to keep your pool water sparkling blue. In addition to looking better, keeping it clean in the pool significantly increases the effectiveness of a pool’s circulation system and lowers the amount of chlorine needed to keep the water clear.

Skimming the pool for debris is an easy procedure, takes very little time out of your day, and only takes a low-cost, long-handled net and skimmer basket. It is important to skim water regularly — preferably everyday. If debris builds up, it eventually sinks to the bottom of the pool, making it harder to remove.

Consider trimming back nearby trees and bushes to reduce the amount of leaves, pollen and blossoms that fall into the pool or purchase a pool cover.

Scrubbing a pool is another way to reduce the amount of debris build-up at the end of the pool. Scrubbing a pool can significantly help to prevent the build-up of growths such as algae and calcium deposits.

For vinyl, fiberglass pool or tiles, use a softer scrub brush. Harder brushes are better suited for pools made of plaster-lined concrete. It’s best to scrub a pool at least once a week to prevent unwanted build-up.

4. Vacuum and Filter the Pool

If manual skimming and scrubbing seems too tedious, you have other options to keep your pool clean. Vacuums and filters drastically reduce the amount of debris and unsolicited growth in a pool.

If you use a vacuum, run the vacuum at least one a week for about 30 minutes. Filters require less manual work and run constantly on its own. Don’t forget to “backwash” a filter once a month to clean out the pipes within the system.

5. Keep the Chemicals Balanced

Chemical levels are one of the most important aspects of pool maintenance. Unbalanced water doesn’t just look bad, it can be hazardous, causing skin and eye irritation. Test pool chemicals once a week with easy to use testing kits. When all the chemicals in your pool are properly balanced, the water should be crystal clear, have no scent and leave very little residue on your skin.

6. Winterize Your Pool at the End of Each Season

At the end of swimming season, you need to get your pool ready for cold weather and inactivity. Properly winterizing your pool can save time and money on repairs next swimming season. Finding out that your pool cracked or became bacteria-ridden over the winter is a major bummer.

If you live in an area that doesn’t freeze during the winter months:

• Lower the water level

• Remove all pool equipment and toys

• Balance the chemistry of the remaining water

  • pH: 7.2 – 7.4

  • Alkalinity: 80 – 120 ppm

  • Calcium Hardness: 180 – 220 ppm

• Clean the pool

• Lubricate O-Rings

• Add winterizing algaecide

• Cover the pool

If you live in an area that does freeze over in the winter:

• Drain the pool, do not leave any water in the pool or in the pipes

• Clean the pool

• Lubricate O-Rings

• Cover the pool

As you lounge poolside this summer, don’t forget to think about your pool maintenance schedule. Keeping your cool blue waters clean can be easy by following these simple steps.